Arduino Pro mini Atmega 328 - 5V 16Mhz
Descriere:
20 Digital input output ports:TX, RX, D2 D13, A0 A5
8 analog inputs ports:A0 A7
1 pairs of TTL level serial transceiver ports RX TX
6 PWM ports: D3, D5, D6, D9, D10, D11
Main Chip Atmel Atmega328P-AU
Support Serial Download (a5du1)
Support external power supply 3.8-12V DC
Support 12V or less than 12V battery power supply
16MHz clock frequency al3x
Size: 33.8mm x 18mm
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
digitalelectron.wordpress.com
Esp32 placa dezvoltare cu alimentare AC90-250V AC cu releu de 10A
+ gratuit codul demo (ca in poza - se poate dezvolta ulterior foarte usor)
Product description:
AC-powered ESP32 single relay development board equipped with ESP32-WROOM-32E
WiFi&BLE module, all I 0 ports are led out, support AC90-250V power supply mode. Suitable for ESP32 secondary development learning, smart home wireless control and other occasions.
Features:
1. On-board mature and stable ESP 32-WROOM-32E module, large capacity 4M Byte Flash;
2. The I O port and UART program download port of the ESP32 module are all led out to facilitate secondary development;
3. Onboard AC-DC switching power supply module, power supply mode supports AC90-250V;
4. Onboard ESP32 module RST reset button and lO0 programmable button;
5. ESP32 supports the use of Ad IDE development tools and provides reference programs in the Ad development environment;
6, Onboard 1 5V relay, output switch signal, suitable for controlling loads within AC 250V DC30V;
7. Onboard power indicator, 1 programmable LED and relay indicator.
5e73e al3x e1t35 home assistant tasmota sonoff
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
digitalelectron.wordpress.com
Joystick PS2
Feature:
100% brand new and high quality.
PS2 joystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.
Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, when pressed with the direction of the arrow, the readout voltage values ??with increasing, up to 5V; press the arrow in the opposite direction, the readout voltage reduction , a minimum of 0V.
Specification:
Net Weight:11g
Weight:21g
Color:Black
Size:34.5*26*38mm
b0t al3x r3d
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
www.digitalelectron.wordpress.com/livrare
Mini sursa comutatie - 1W
Sursa izolata e disponibila in doua modele va rog sa specificati tensiunea dorita:
- In: 12V - Out :5V
- In: 5V - Out: 5V
- Acesta sursa este izolata galvanic intrarea fata de iesire
- Putere maxima pe iesire de 1W (200mA - la 5V)
Atentie la pinout !
Descriere:
Tensiune de intrare: 5V
Tensiune de ieșire: DC 5V
Curentul de ieșire: 20 200mA
Reflectat curent Ripple: 20mA
Sarcina maximă capacitivă: 220 F
Tensiune de intrare 4.5-5.5V
Dimensiune 10mm x 11mm
Descriere:
Tensiune de intrare: 12V
Tensiune de ieșire: DC 5V
Curentul de ieșire: 20 200mA
Reflectat curent Ripple: 20mA
Sarcina maximă capacitivă: 220 F
Tensiune de intrare 11.5-12.5V
Dimensiune 10mm x 11mm
485, 5y5sa, d0w7 al3x
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
digitalelectron.wordpress.com
Esp8266 placa dezvoltare cu alimentare duala AC90-250V AC si DC 7-12V cu releu de 10A
+ gratuit codul demo (ca in poza - se poate dezvolta ulterior foarte usor)
Description:
LC-Relay-ESP 12-1R-MV single relay development board onboard ESP-12F WiFi module, I O orifice full lead ,support AC90-250V DC7-12V USB 5V etc.many supply power way. Provide Arduino develop environment reference code,suit for ESP8266 secondary development study, smart home wireless control.
Feature:
1>.Support both AC and DC Input
2>.Built-in 4M Byte Flash
3>.UART Communication Protocol
Parameter:
1>.Model: LC-Relay-ESP12-1R-MV
2>.Work Voltage:AC90-250V DC7-12V USB5V
3>.WIFI IC: ESP8266
4>.Communication Protocol:UART
5>.Load voltatge:AC 250V or DC 30V(Max)
6>.Load current:10A(Max)
7>.Work Temperature:-25 85
8>.Work Humidity:5% 95%RH
9>.Size:80*50*19mm
5e73e al3x e1t35 home assistant tasmota sonoff
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
digitalelectron.wordpress.com
PCB de inalta calitate, cablaj dublu placat cu treceri metalice.
Ideal constructie shield custom pentru Arduino MEGA / DUE (R1/R2/R3)
Nota:
In lista mea de componente am tot ce va trebuie sa va construiti un Arduino DIY, home made, microcontroler (Atmega 328), soclu DIP 28, cuart 16Mhz, condensatori ceramici 22pf, placa cablaj de test, pini simpli (mama sau tata) si/sau stack (cei lungi)
a5du1 al3x p5bb r3d
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
www.digitalelectron.wordpress.com/livrare
Modul I2C
Descriere
- Multiplicator porturi I O cu PCF 8574 display
- Interfață seriala i2c pentru LCD 16x2 20x4, limita este libraria, se poate folosi la orice (l5d3w al3x)
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
digitalelectron.wordpress.com
Watmetru DC 0-200V - fara sunt
Atentie nu contine sunt !
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Daca vreti cu sunt inclus pretul e mai jos:
- Watmetru + sunt de - 50A - 170 lei
- Watmetru + sunt de - 100A - 185 lei
- Watmetru + sunt de - 200A - 200 lei
- Watmetru + sunt de - 300A - 210 lei
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Wattmetrul este configurabil din meniu unde se alege suntul folosit 50A, 100A, 200A si 300A
Atentie pentru montarea la baterie in sisteme solare (etc) nu se alimenteaza pe cele 2 fire separat decat daca tensiunea bateriei e sub 8V !!! respectati schema din poza (sau manual)
Atat in poza cat si manual aveti desenat "baterie" si "sarcina" pentru montare in sisteme regenerabile (foto, eoliant etc) "bateria" din schema inseamna invertorul (MPPT ... charger .. etc) iar "sarcina" inseamna bateria dumneavoastra (12V, 24V, 48V, 96V ...) Am pus si o schema pentru configuratie sistem solar de exemplu
Acest watmetru se poate monta la ORICE atat timp cat se respeceta specificatiile tehnice cum ar afi: NUMAI tensiune continua (NU alternativ) avand maxim 200V iar curent max in functie de sunt 50-300A
Daca nu se respecta cele de mai sus, nu ofer garantie.
- Wattmetru de curent continuu DC 0-200V (cand este alimentat sub 8V necesita alimentare separata)
- Functii de masurare: tensiune, curent, putere masurata in sarcina cat si energia consumata in unitate de timp (wh)
- se poate seta parametri bateriei si se poate vdea cand e goala sau plina
- modul de conexiune cabluri este afisat in poze (conform pozei de pe spatele aparatului)
- Functie de iluminare pe intuneric (LCD iluminat)
- dimensiune cote (mm) in ultima poza
- Ideal pentru panouri solare / masina auto ... / 5v, 9v, 12v, 18v, 24v, 30v, 48v, 50v, 72v voltmetru ampermetru curent tensiune putere
Nota: Tine minte puterea consumata si dupa oprirea alimentarii. Se comporta ca un contoare de energie electrica.
Video Youtube:
https://www.youtube.com/watch?v=pEnExPJGqlw
Function description
Voltage Measuring range: 0-200V. (when the test voltage is < 8V, please use the independent power supply mode)
Voltage Minimum resolution:0.01V.
Voltage The starting test voltage: 0.05V
Voltage Measurement accuracy:1%
Current Measuring range: 0-300A(Type: PZ-015) can set 50A, 100A, 200A,300A four range depend on the external shunt, the factory
default is 100A.
Current Minimum resolution: 1mA
Current The starting test current: 10mA
Current Measurement accuracy:1%
Power Measuring range: 0-60000W
Power Minimum resolution: 0.01W
Power The starting test power: 0.2W
Power Measurement accuracy:1%
Impedance = Voltage/ Current
Impedance Measuring range: 0-1000O (When over the test range or the current is zero, it display --- )
Impedance Minimum resolution: 0.1O
Impedance Measurement accuracy:1%
Internal resistance= (Full voltage Bring load voltage) / Bring load current, when the bring load voltage is larger than the
maximum voltage, the internal resistance is zero.
Internal Resistance Measuring range: 0-999mO (Display format: 999mO, when over the test range or the current is zero, it display --- .)
Internal Resistance Minimum resolution: 1mO
Voltage Measurement accuracy:1% v0l7 al3x
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
www.digitalelectron.wordpress.com/livrare
Termometru digital cu umiditate
- Cleme de prindere tip panou
- Nu are lumina pe fundal
- Culoare alb
- lungime cablu - 1m
Ce contine:
- 1 x Termometru digital cu sonda 1m (-40 c 70 c) si Hygrometru (Umiditate)
- 2 x baterii LR44
Description
Temperature Range: -40 c 70 c
Measuring Humidity Range: 10% RH 99% RH
Humidity Accuracy:5%
Humidity Display Resolution: 1% RH, t3rm1
Temperature Accuracy: 1 C
Temperature Display Resolution: 0.1 C
Operating Voltage: 1.5v, or LR44 batteries(Include)
Dimension: 48 x 28.5 x 15.2mm
LCD Dimension: 40 x 17mm
Installation dimensions:46 x 27 x 13.5mm
Sensor cable length:1m al3x r3d
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
www.digitalelectron.wordpress.com/livrare
Mini sursa step down max 28V IN si max 3A - (2A fara racire)
Sursa reglabila dimensiune foarte mica (22mm x 11mm) + tensiuni fixate (1.8V 2.5V 3.3V 5V 9V 12V) cu 2A cu racire ambientala si max 3A cu racire "fortata" (radiator si/ventilator)
Nota: Pentru a folosi tensiunile fixate, trebuie sa "taiati" (intrerupeti) traseul de la ADJ (vezi poze)
Nota: La sarcini de peste 2A sau peste 75-80C (temperatura integratului), necesita racire suplimentara cu un mic radiator sau mic ventilator.
Description
1.Input Voltage:DC 4.5-28V
2.Output Voltage:integration adjustable and fixed output,back side can choose fiexd output voltage
3.Adjustable Range:0.8-27V,fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V)
4.Output Current:3A (max),actual testing input 12V output 1.5A
5.Transform Efficiency:97.5%(max) (6.5 to 5V 0.7A)
6.Switch Frequency:500KHz
7.Output Ripple Wave:20mV (12V to 5V 3A) 20m band width
8.Operating Voltage:-40 Celsius-85 Celsius
9.Output Overvoltage Protection:no
10.Static Current:0.85MA
11.Load Adjust Rate: 1%
12.Voltage Adjust Rate: 0.5%
13.Dynamic Response Speed:5% 200uS
14.Output Short Circuit Protection:yes
15.Input Transposition Protection:no
16.Enable Control:yes
17.Connecting Type:soldering
18.Input Way:soldering
19.Output Way:soldering/pin 5y5sa d0w7 al3x
20.Soldering Hole Space:2.54mm
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
www.digitalelectron.wordpress.com/livrare
Senzor flacare iesire Analogica si Logica I/O
Description
1. can detect the flame or the wavelength at 760 nm to 1100 nm range of the light source, the test flame lighters distance of 80cm, the larger the flame, the greater the distance test
2. the detection angle of 60 degrees, the flame spectrum particularly sensitive
3. sensitivity adjustable (shown in blue digital potentiometer adjustment)
4. the comparator output signal clean waveform is good, driving ability, than 15mA
5. with a precision potentiometer adjustable sensitivity adjustment
6. Operating Voltage 3.3V-5V
7. the output in the form: DO digital switching outputs (0 and 1) and AO analog voltage output
8. a fixed bolt holes for easy installation
9. small plates PCB size: 3.2cmx1.4cm
10. using a wide voltage LM393 comparator
Module for use:
1. the flame flame sensor most sensitive to ordinary light is also a reaction, generally used as fire alarm and other purposes.
2. a small panel output interface can be directly connected with the microcontroller IO port
3. the sensor and the flame to maintain a certain distance, so as not to damage the sensor temperature of the test flame lighters distance 80cm, the larger the flame, the greater the distance test
4. small plates analog output mode and the AD conversion process, you can get higher accuracy (5en50r, t3rm1 al3x) r3d
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
www.digitalelectron.wordpress.com/livrare
WS2812B - 5V - Led adresabil RGB
Video demo => https: youtu.be qMz9KEjTafc
OBS:
- Pret pentru 1 buc = 1 Lei (mai jos este explicat pretul redus)
- Ledurile au tensiune de lucru 5V !!
- Pretul este fractionat pe bucata led nu pe 1m!
Pret in functie nr de bucati (leduri):
- intre 1-10 buc = 10 lei buc
- intre 10-49 buc = 7 lei buc
- intre 50-99 buc = 4 lei buc
- intre 100-199 buc = 3 lei buc
- intre 200-299 buc = 2 lei buc
- peste 300 buc = 1 lei buc
Descriere pe scurt:
Tip IC : WS2812B
Culoare material plastic constructie: Led-alb si si modul PCB (ca in poza)
Voltaj lucru: DC 5V
Lungime unda culoare (nm): Rosu-650, Verde-520, Albastru-460
Consum maxim absolut 1 buc led: 0.3W (0.06A la 5V)
Unghi iluminare: 120 grade
Dimensiune led: 5mm x 5mm
Durata viata: aproxore
Nu sint waterproof!
Nu suporta schimbarea polaritatii! Respectati indicatiile inscrise pe led (+) si (GND)
Description:
Excellent, high quality intelligent lighting! Based on high quality SMD5050 RGB LEDs embed (Built-in) integrated WS2812 control IC, each LED is independently addressable and opening up entirely new lighting possibilities. l3d al3x
WS2812b, 5050 SMD W IC Built in
One WS2812B IC control ONE LED Chip
Each LED is individually addressable, with 8 bits of green, red and blue data shifted in for 24 bit color
Non-waterproof,
Work Voltage: 5V
Width: 10mm
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
digitalelectron.wordpress.com
PCB de inalta calitate, cablaj dublu placat cu treceri metalice.
Ideal constructie shield custom pentru Arduino UNO, MEGA / DUE (R1/R2/R3)
Nota:
In lista mea de componente am tot ce va trebuie sa va construiti un Arduino DIY, home made, microcontroler (Atmega 328), soclu DIP 28, cuart 16Mhz, condensatori ceramici 22pf, placa cablaj de test, pini simpli (mama sau tata) si/sau stack (cei lungi). a5du1 al3x p5bb r3d
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
www.digitalelectron.wordpress.com/livrare
Releu apa nivel cu releu 30A - contacte separate galvanic, poate comanda DC sau AC independent.
Automatizarea nivel apa este disponibila in 2 versiuni:
- 60 lei - Standard cu alimentare la 12V DC
- 80 lei - Restul versiunilor
- - - - - - - - - - - - - - - - - - - - - - - -
Curent continuu DC !
- Modul - 12V (versiunea de 12V-DC) - modelul STANDARD
- Modul - 14-32V (versiunea cu plaja de la 14V pana la 32V-DC)
Curent alternativ AC !
- Modul - 12-24V (versiunea cu plaja de la 12V pana la 24V-AC)
- - - - - - - - - - - - - - - - - - - - - - - -
Optional:
- Alimentator (AC-220) out DC 12V (in limita a 1 buc la un modul) + 20 lei
- Un singur alimentator 12V poate comanda pana la 10 module
Descriere:
Modulul vine fara alimentator si fara senzori.
Senzorii pot fi orice, fire, electrozi inox ... etc
Detecteaza nivelul apei prin conductivitatea electrica dintre cele 3 puncte (senzori) porneste umplerea (golirea) si se opreste doar cand s-a umplut (golit)
Face ciclu complet umplere (golire) fara intermitente de alta natura.
Releu comanda max 30A - 220VAC, RECOMAND pentru viata lunga a fi folosit la 50% (15A - 3.5Kw) a nu se folosi la sarcina max de 30A - 7kw chiar daca suporta, speranta de viata este de 1 an ! (valabil la majoritatea releelor cu actionari dese) daca se doreste a comanda sarcini si pompe mari (hidrofor) avand curent mai mare de 15A acest modul va comanda un contactor si acela va comanda sarcinile mari de putere
Atentie functia automatizare de umplere bazin cu apa se poate inversa si poate goli un bazin cu apa (sau alte substante) prin simpla inversare POZITIEI senzorilor, si anume: pozitia senzorului de gol se pune in pozitia senzorului de plin si invers, astfel se inverseaza functia de umplere in bazin in functia de golire bazin. Acest modul este reversibil.
Features:
1: Wide range of applications
2: Easy to operate
3: Small size
4: stable performance
5: Voltage specification optional 12V - DC
Product name: Automatic water level controller
Specifications: 12V - DC
Module size: 5*4.4*1.8cm (manual measurement)
Net weight: 24g
Module function: When the water level is lower than the B probe, the water is automatically pumped.
Stop pumping when the water level reaches the C probe.
The A B C water level sensing line can be used with ordinary wires, and the wire ends are exposed to 5CM.
Automatically pump water when the water level is below point B
Stop pumping when the water level is above point C
5en50r t3rm1 in5ta un1q 5e73e al3x b0t pompa automat electrovalva fosa fose umplere golire evacuare senzor sensor 7V, 9V, 10V, 12V, 18V, 24V, 36V
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
digitalelectron.wordpress.com
Izolator termic pentru peltier cu dimensiunea de 40mm x 40mm x 4.1mm, arata exact ca in poze
Insulation Cotton Washer
for Thermoelectric Cooler Peltier
With Side stickers, t3rm1 al3x in5ta
Dimensions : 40mm x 40mm x 4.1mm
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
www.digitalelectron.wordpress.com/livrare
Modul Releu 5V-DC - Bistabil - cu un canal
(am si releu bistabil ce functioneaza in gama 6V - 24V in alt anunt)
Description:
Working voltage: DC 5V
Working current: 70MA
Standby current: 1UA
Load current: AC 250V / 10A, DC 30V / 10A
Trigger mode: Low pulse trigger
Size: 35mm * 16mm * 18.5mm (L * W * H), Very small size
Weight: 13.5 g
This is a bistable (self-locking) relay module,Trigger once, the relay pull (and holds);Trigger again, the relay releases (and holds)
al3x b0t 5en50r 5e73e latch on off on-off flip flop relee Self locking Low Pulse Trigger Module
USE : By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
www.digitalelectron.wordpress.com/livrare
Set sigranta cablu max 250VAC
Se ofera sub forma de kit cablu + 1x sigurante la alegere de 1A, 3A si 5A. Rog sa specifcicati modelul cand comandati
- pret pentru 1 buc = 3 Lei
- pret peste 10 buc = 2 lei / buc
Acest cablu cu siguranta a fost adus special pentru bms -uri si active balancing -uri pentru protectie scurt circuit electronica
(al3x, l1th1, y0p, 5y5sa, d0w7, 2s0, c0n)
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
www.digitalelectron.wordpress.com/livrare
HC-05 shield modul bluetooth
Se alimenteaza la 5V dar atentie nivel logic TTL este de 3.3V !!!
Description:
1. Wireless serial Bluetooth port with free extension cable
2. Include mezzanine board that includes regulator and connector to allow easy
3. interface to and Arduino, AVR, PIC or other microcontroller (5a5i0 al3x)
4. Supply voltage can be between 3.6 to 6V DC. Unpaired current is about 30 ma, And it's about 10mA after paired.Pls notice the input voltage can't exceed 7V.
5. Easy to connect this module with any standard Bluetooth device, just search and key "1234" passcode.
6. The link from the machine, computer, Bluetooth with Bluetooth function from the function with a variety of hosts, the majority with a Bluetooth-enabled cell phone, PDA, PSP and other intelligent terminal pair pairing between slave can not.
ATENTIE!
Conf. datasheet tensiunea maxima de lucru este de 3.3 3.6V valabil si pe pinii de comunicatie UART (RX,TX).
Acest modul prezinta o sursa de alimentare si poate functiona pana la 5V dar comunicatia UART (RX,TX) este tot pe 3.3V
Daca acest modul se conecteaza la Arduino ... cat si la alte dispozitive ce tensiunea nivelului logic este mai mare de 3.3V mai precis 5V este necesar acest convertor
Am si asa ceva (vezi ultima poza) si costa 5 lei
Daca nu se respecta interconectarea corecta privind nivelele de tensiuni logice NU OFER GARANTIE
Un efect de exemplu, daca conectam un modul ce are comunicatie de 3.3V la Arduino UNO ce are nivelul logic de 5V, RX (I2C dupa caz) din modulul de 3.3V se va arde si devine scurt fata de GND !!!
In acest caz modulul devine inutilizabil.
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
digitalelectron.wordpress.com
Modul GMS SIM900
Acest modul Nu are 3G deci nu merge RDS-DIGI
Daca vreti GSM cu 3G - RDS - DIGI, vezi (click) la anunturile utilizatorului
Frecventa: quad-band network1900MHz
The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSMand SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard.
Features
GPRS multi-slot class 10 8
GPRS mobile station class B
Compliant to GSM phase 2 2+
Class 4 (2 WMHz)
Class 1 (1 W1900MHz)
Control via AT commands - Standard Commands: GSM Enhanced Commands: SIMCOM AT Commands.
Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
Embedded TCP UDP stack - allows you to upload data to a web server.
RTC supported. (5a5i0) al3x r3d
Selectable serial port.
Speaker and Headphone jacks
Low power consumption - 1.5mA(sleep mode)
Industrial Temperature Range - -40 C to +85 C
Size:8.5x5.7x2cm(approx)
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
digitalelectron.wordpress.com
Copiator 125KHz RFID
(bateria e inclusa gratuit)
Aparat de copiat cartele tip breloc, card, token . . . etc frecventa de 125 Khz chjpset - EM4100 T5577 EM4305 sau cu prot0c0l compatibil
Description
Duplicate the card ID from the EM4100 or compatible card or key fob for backup purpose
Support 125KHz EM4100 or compatible card format only
Standalone 2 buttons Simple operation
Don t need connect with computer for operation
Built-in LED and buzzer indicators
Built-in transceiver antenna
Battery power supply: 3 V (2 x AAA battery)
Portable design: 115 x 70 x 30 mm (r37id copiere acces sistem)
HOW TO USE IT :
The steps of Operation as below:
Step 1 Switch On , Power Led should flash one second.
Step 2 Put a card what should be copied in Read Area.
Step 3 Press Read Button, If Read oK Read Led should flash and Beep sounds.
Step 4 Put a card should write , Press Write Button and keep press, about one second ,if Beep a sound means Copy succeed.
Step 5 If want write more card with the same ID ,repeat step 4
Step 6 Switch Off for save Power. clona clonare
Suporta doar anumite cartele Electra si se verifica numai cu proba pe loc.
Cartela Rfid model electra dupa 2010 nu poate fi copiata, are un bit in plus fata de cele de uz comercial copiatoarele de cartele citesc codul standard si chiar daca ai putea citi intreg codul, o cartela reinscriptibila normala accepta un numar standard de biti al3x
- - - - - - - - - - - - - - - - - - - - - - - - -
Livrare in Bucuresti si in tara:
digitalelectron.wordpress.com
Bifează prima casetă pentru a continua